HITBOX 250Amp MIG Welder 110V 220V Aluminum Gas/Gasless MMA TIG Welding Machine. HITBOX Pulse Aluminium MIG Welder 250A 230V Colour Display Digital IGBT Gas Free Wire MMA TIG Welding Machine.
The MIG250 DP 4-in-1 multi-process synergic welder is powerful helper in welding, The IGBT inverter technology provides high power in a light, compact unit. It's designed for for hardware, decoration, car modification, equipment and factory maintenance. This units are capable of performing MIG (can weld aluminum) ARC and LIFT TIG.For Aluminum, Aluminum-silicon, Aluminum-magnesium, stainless steel and iron welding, Gas & No Gas Self-Shielded welding machine. Why you choose HITBOX MIG250DP? Pulse function : The pulse mig welder consists of start current, maximum current and end current (system program). The starting current is small, but the maximum current is large enough to melt the base material and then decrease the current. This could guarantee the effectiveness of the welding and can avoid infiltration into the material.
Nice flakes are formed to get a good weld. Aluminum weldable : The gasless wire welder can be used on carbon steel, stainless steel, aluminum substrate. The gasless MIG and gas lamig can be used with 0.6 / 0.8 / 1.0mm wire. It is good for welding automobiles, doors, pipes and DIY. 250Amp : Overload protection: Exceeding use, forced shutdown protection transformer to eliminate the risk of burns.Easy to adjust: Output adjustment Simply turn the output current regulator knob, easy to operate, no increase in workload. Specifications : Welding thickness: MIG 0.7-10mm, LIFT TIG 1.2-6mm, Arc/MMA 2-12mm. Applicable electrode: 1.6f-3.2f. Applicable wire: f0.6/0.8 / 1.0. What you get: MB15 welding torch, 300A ground cable, electrode holder, gas hose, 2 hose bundle straps, 1 feed rollers.
Advanced IGBT - Maximize durability to overloads, improve work efficiency, longer service time and improve stability. Adopt copper amorphous transformer - High frequency transformer with strong conductivity can save energy, resist to high temperature, provide long working hours and lower loss. Smart chip - Insert smart chip, cooler welder rapidly.When there is something stuck in the machine, it will power off automatically to protect welding machine being damage from overheating. Upgraded large capacitor with premium quality - Its strong anti-electricity fluctuation ability and high energy storage ability can stabilize output current. Aluminum MIG Welder: The 250amp gas-powered mig welding machine can weld aluminum sheets, with its own single-pulse technology, and will not weld through the sheet. (The graphite guide tube needs to be replaced when welding aluminum metal). MIG/MAG/FLUX Welding, Can take up to 035(0.8/1.0 mm) MIG solid wire(Gas MIG).
035"(0.8/1.0 mm) MIG FLux wire(Gasless MIG), 035"/. 045(0.6/0.8/1.0 mm) aluminum wire. Stick Welding, smooth weld and burning fast. This unit can weld with 7018/6011 electrodes up to 5/32.One button selectiondesign, easy to choose different welding mode to meet different welding requirements, Gas/Gasless MIG, Stick or Lift TIG. Synergic Control MIG Function allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses.
It will match the welding chart set in the data. Suitable for all kinds of welding requirements. 035 flux core wire for MIG manual setting; only. 035 available in MIG synergistic setting. Brand: HITBOX - Type: MIG-250 DP - Input power voltage (V): 220V-240v - Welding current adjust range (A): 10 250Amp - Voltage adjustment range (V): (Gas shielded arc welding) 11~26 - Package Weight: 12.5KG (27.56LB) - Package Size: 49.228.538cm(19.3711.2214.96in) - Inverter technology: IGBT - Rated input current (A): 32 - Rated power capacity(KVA): 7.1 - Recommended fuse capacity(A): 50 - Feeding speed adjustment range (m/min): 1.5~16 - Welding wire diameter (mm): 0.6/0.8/1.0 - Rated duty cycle: 60% - Efficiency (%):85 - Welding thickness: 1-8mm - Welding materials: iron, stainless steel, aluminum, galvanized sheet, carbon steel and other metals.
Usable electrode size: 2.5/3.2. 1X 1KG Flux Core Wire. 1X 0.6mm/0.8mm V shape drive roller. 1X 1.0mm/1.2mm U shape drive roller.1X 110V to 220V Cable adapter. 1X Graphite wire feed tubewhen welding aluminum, please do use it with the mig gun. Upgraded Multifunctional MIG Welding Machine.
Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition. If you have any issue, you can just give us a message, and we give you full resolve.
Please be patient when contacting us, all messages will be replied within 24 hours. Please let us know immediately if a package is damaged upon arrival. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\MIG Welders".The seller is "hitboxstore" and is located in this country: GB. This item can be shipped to United Kingdom.